Being the target of recurring problems on your automobile is really annoying, in addition to the economic side that these concerns represent, one must also add the time lost with a non-functional Chrysler 300 and the time spent to detect and solve the breakdown. However, some problems are less severe than others, which is not to say that they do not worry us. Today we are going to check out a problem that can happen to everyone, having vibrations at acceleration on Chrysler 300. This problem can oftentimes be difficult to perceive but it must be dealt with. We will so start our guideline with the sources of these vibrations on Chrysler 300, then, with the solutions you have to reduce or stop these tremors.

acceleration-vibrations-chrysler-300

Why does my Chrysler 300 produce vibrations when accelerating?

So let’s start our guideline with the sources of this form of problem on your car. You should already know that an engine, especially if it is old or if it has been driven a lot, can naturally vibrate without being a problem behind it. Large diesel engines, especially those with a lot of torque, can provoke this form of feeling, both at idle and when accelerating.

I feel vibrations on my Chrysler 300 only when accelerating

Let’s take the most interesting circumstance for us in this guideline. The fact that you experience trembling on your Chrysler 300 during your acceleration phases, in this scenario you will have to check the condition of several components because various of elements can be at the origin of these vibrations and even if you are unfortunate a combination of several of them may also be possible, here is the list of parts that can be involved.

  • Turbo: If the turbo of your Chrysler 300 is defective, it may provoke vibrations that you will suffer when you accelerate at the moment it is activated.
  • The turbo pressure sensor: This sensor will control the pressure exerted in the turbo of your car, if it fails it may affect the performance of your turbo and generate vibrations that you may experience within the acceleration of your Chrysler 300.

    • .

  • If the turbo is punctured or harmed, the effect will be the same, the power supply of your turbo will be troubled and its performance too. Make sure you visually verify their condition.

I’m getting vibrations on my Chrysler 300 at acceleration and deceleration

We will now look into the scenario where you experience vibrations on your Chrysler 300 when you are accelerating but also when you are idling. If you only experience vibrations when you are idling on your Chrysler 300, please have a look at our guideline dedicated to this problem to get rid of your problem. If, on the other hand, you realize that your Chrysler 300 vibrates when accelerating but also when it is stopped, here is the list of components to verify:

  • EGR valve: In reality this valve which handles the return of exhaust gases for pollution standards can become dirty and affect the evacuation of exhaust gases which can provoke Chrysler 300 vibrates when accelerating but also when stopped.
  • Injectors: Your injectors that regulating the fuel/air mixture flow may be dirty or damaged, which will discharge the wrong amount of mixture and thus prevent your engine block from working correctly, it is even possible that one or more of your cylinders are not running correctly.
  • Fuel Filter: Like the injectors, if the filter is clogged it will not let the fuel pass correctly and therefore affect the performance of your Chrysler 300, up to the point of leading to vibrations during acceleration.

Here are the most important triggers of a Chrysler 300 that vibrates at acceleration

What can I do to stop the vibration when I accelerate on my Chrysler 300? What can I do?

To finish , in this last section, we will tell you the solutions available to you to handle these tremors on your car when you accelerate. Here is the best attitude to adopt based on the part that is affected:

  • Turbo: If your turbo starts all these vibrations when you accelerate your Chrysler 300, it will be good for you to control all the parts linked to it because changing a complete turbo is a big budget and typically the problem does not come precisely from the turbo. So remember to check out your turbo pressure sensor, your flowmeter, the EGR valve and the hoses of your turbo. Otherwise take your Chrysler 300 to your mechanic.
  • EGR valve: The EGR valve has the advantage that it is often easy to access and simple to disassemble/clean. You can always examine it and clean it, for this see our guideline on cleaning the EGR valve of an Chrysler 300.
  • Injectors: Injectors are very sensitive parts and a few harmful particles may be enough to affect their performance. Use a fuel additive to simply clean the injectors, if this is not enough you will have to go to a specialist.
  • Fuel Filter: If it is the fuel filter, only change it. A fuel filter doesn’t clean itself, so if it is clogged you will simply have to replace it with a new one.

Now you have all the info you need to find the cause of the vibrations at acceleration on your Chrysler 300. If you don’t feel able to accomplish certain procedures don’t hesitate to go to your auto technician.

To discover more tips on the Chrysler 300, take a look at the Chrysler 300 category.