Facing problems on your motor vehicle is particularly irritating, furthermore the economic aspect that these concerns represent, one must also add the time lost with a non-operational BMW X6 and the time spent to detect and repair the breakdown. However, some problems are less severe than others, which is not to say that they do not get worried us. In this article we are going to look into a problem that can affect many of us, having vibrations at acceleration on BMW X6. This problem can sometimes be hard to perceive but it must be looked after. We will therefore begin our content page with the sources of these vibrations on BMW X6, then, with the answers you have to reduce or stop these tremors.

acceleration-vibrations-bmw-x6

Why does my BMW X6 emit vibrations when accelerating?

So let’s begin our content page with the sources of this form of problem on your car. You should already know that an engine, specifically if it is old or if it has been driven quite a bit, can naturally vibrate without being a problem behind it. Large diesel engines, specifically those with a lot of torque, can generate this kind of impression, both at idle and when accelerating.

I feel vibrations on my BMW X6 only when accelerating

Let’s take the most interesting case for us in this content page. The fact that you suffer trembling on your BMW X6 during your acceleration phases, in this scenario you will have to verify the condition of different parts because many of elements can be at the starting point of these vibrations and even if you are unfortunate a combination of several of them may also be possible, here is the list of auto parts that can be concerned.

  • Turbo: If the turbo of your BMW X6 is faulty, it may generate vibrations that you will suffer when you accelerate at the moment it is running.
  • The turbo pressure sensor: This sensor will manage the pressure exerted in the turbo of your car, if it fails it may bother the behavior of your turbo and deliver vibrations that you may experience during acceleration of your BMW X6.

    • .

  • If the turbo is punctured or ruined, the result will be the same, the power supply of your turbo will be disturbed and its behavior too. Make sure you visually verify their condition.

I’m experiencing vibrations on my BMW X6 at acceleration and deceleration

We will now look into the case where you experience vibrations on your BMW X6 when you are accelerating but also when you are idling. If you only experience vibrations when you are idling on your BMW X6, please consult our content page focused on this problem to fix your problem. If, alternatively, you detect that your BMW X6 vibrates when accelerating but also when it is stopped, here is the list of components to verify:

  • EGR valve: In fact this valve which manages the return of exhaust gases for pollution standards can become dirty and disturb the evacuation of exhaust gases which can generate BMW X6 vibrates when accelerating but also when stopped.
  • Injectors: Your injectors that control the fuel/air mixture flow may be dirty or damaged, which will generate the wrong amount of mixture and thus prevent your engine block from working properly, it is even possible that one or more of your cylinders are not running correctly.
  • Fuel Filter: Like the injectors, if the filter is clogged it will not let the fuel pass correctly and therefore disturb the operation of your BMW X6, up to the point of producing vibrations during acceleration.

Here are the most important triggers of a BMW X6 that vibrates at acceleration

What can I do to stop the vibration when I accelerate on my BMW X6? What can I do?

Finally, in this last section, we will provide you the answers available to you to overcome these tremors on your car when you accelerate. Here is the best attitude to adopt depending on the component that is affected:

  • Turbo: If your turbo starts all these vibrations when you accelerate your BMW X6, it will be good for you to control all the auto parts linked to it because changing a complete turbo is a big budget and in most cases the problem does not come directly from the turbo. So make sure you take a look at your turbo pressure sensor, your flowmeter, the EGR valve and the hoses of your turbo. Otherwise take your BMW X6 to your mechanic.
  • EGR valve: The EGR valve has the benefit that it is more often than not easy to access and simple to disassemble/clean. You can always check out it and clean it, for this see our content page on cleaning the EGR valve of an BMW X6.
  • Injectors: Injectors are very fragile auto parts and a few impurities may be enough to disturb their operation. Use a fuel additive to simply clean the injectors, if this is not enough you will have to go to a professional.
  • Fuel Filter: If it is the fuel filter, simply replace it. A fuel filter doesn’t clean itself, so if it is clogged you will only have to replace it with a new one.

Now you have all the information you need to find the source of the vibrations at acceleration on your BMW X6. If you don’t feel able to execute certain operations don’t hesitate to go to your mechanic.

If you want more guides on the BMW X6, go to our BMW X6 category.