Being the target of recurring problems on your automobile is specially frustrating, in addition to the economic side that these concerns represent, one must also add the time lost with a non-functional Bmw Serie 1 and the time spent to diagnose and fix the malfunction. On the other hand, some problems are less serious than others, which is not to say that they do not worry us. On this page we are going to check out a trouble that can happen to all of us, perceiving vibrations at acceleration on Bmw Serie 1. This trouble can in some cases be hard to perceive but it must be dealt with. We will therefore begin our article with the sources of these vibrations on Bmw Serie 1, then, with the solutions you have to reduce or stop these tremors.

acceleration-vibrations-bmw-serie-1

Why does my Bmw Serie 1 make vibrations when accelerating?

So let’s begin our article with the sources of this form of trouble on your car. You should already know that an engine, especially if it is old or if it has been driven quite a bit, can naturally vibrate without being a trouble behind it. Large diesel engines, especially those with a lot of torque, can cause this sort of discomfort, both at idle and when accelerating.

I feel vibrations on my Bmw Serie 1 only when accelerating

Let’s take the most interesting case for us in this article. The fact that you undergo trembling on your Bmw Serie 1 during your acceleration phases, in this situation you will have to verify the condition of several elements because various of elements can be at the origin of these vibrations and whether or not you are unlucky a combination of several of them may also be possible, here is the list of components that can be concerned.

  • Turbo: If the turbo of your Bmw Serie 1 is defective, it may cause vibrations that you will suffer when you accelerate at the moment it is turned on.
  • The turbo pressure sensor: This sensor will control the pressure exerted in the turbo of your car, if it fails it may disturb the performance of your turbo and make vibrations that you may experience at the time of acceleration of your Bmw Serie 1.
  • .

  • If the turbo is punctured or ruined, the effect will be similar, the power supply of your turbo will be troubled and its performance too. Remember to visually examine their state.

I’m experiencing vibrations on my Bmw Serie 1 at acceleration and deceleration

We will now concentrate on the situation where you experience vibrations on your Bmw Serie 1 when you are accelerating but also when you are idling. If you only experience vibrations when you are idling on your Bmw Serie 1, please seek advice from our article focused upon this trouble to resolve your problem. If, on the other hand, you identify that your Bmw Serie 1 vibrates when accelerating but also when it is stopped, here is the list of components to examine:

  • EGR valve: Indeed this valve which manages the return of exhaust gases for pollution standards can become dirty and disturb the evacuation of exhaust gases which can cause Bmw Serie 1 vibrates when accelerating but also when stopped.
  • Injectors: Your injectors that regulating the fuel/air mixture flow may be dirty or damaged, which will release the wrong amount of mixture and thus prevent your engine block from working properly, it is even possible that one or more of your cylinders are not running properly.
  • Fuel Filter: Like the injectors, if the filter is clogged it will not let the fuel pass properly and therefore disturb the performance of your Bmw Serie 1, up to the point of leading to vibrations during acceleration.

Here are the main triggers of a Bmw Serie 1 that vibrates at acceleration

What can I do to stop the vibration when I accelerate on my Bmw Serie 1? What can I do?

To conclude, in this last section, we will provide you the answers available to you to handle these tremors on your car when you accelerate. Here is the best attitude to adopt dependent on the component that is affected:

  • Turbo: If your turbo starts all these vibrations when you accelerate your Bmw Serie 1, it will be good for you to control all the components linked to it because changing a complete turbo is a big budget and generally the trouble does not come specifically from the turbo. So remember to check out your turbo pressure sensor, your flowmeter, the EGR valve and the hoses of your turbo. Otherwise take your Bmw Serie 1 to your garage.
  • EGR valve: The EGR valve has the advantage that it is often times easy to access and easy to disassemble/clean. You can always take a look at it and clean it, for this see our article on cleaning the EGR valve of an Bmw Serie 1.
  • Injectors: Injectors are very sensitive components and a few harmful particles may be enough to disturb their performance. Use a fuel additive to simply clean the injectors, if this is not enough you will have to go to a specialist.
  • Fuel Filter: If it is the fuel filter, simply replace it. A fuel filter doesn’t clean itself, so if it is clogged you will just have to replace it with a new one.

Now you have all the info you need to locate the source of the vibrations at acceleration on your Bmw Serie 1. If you don’t feel able to execute certain operations don’t hesitate to go to your mechanic.

To get more tips on the Bmw Serie 1, take a look at the Bmw Serie 1 category.