Monitoring your vehicle is vital nowadays, in reality, if you do not do the minimum service of it, or if you do not take into account alerts of abnormality, you strongly risk to observe your car getting in bad conditions. This is specifically the subject we are gonna focus on in this article, one of the symptoms that most disturbs motorists is the ABS warning light on Volkswagen Polo 6. In an attempt to help you analyze this warning light, we will first take a look at what this ABS warning light corresponds to, then in a second how to proceed if the ABS light is on Volkswagen Polo 6?.

abs-light-stays-on-volkswagen-polo-6

What does the ABS light on Volkswagen Polo 6 indicate?

We will begin our article content with the definition of an ABS warning light on Volkswagen Polo 6, for this, in first, we will see what an ABS is, and later on, why the ABS light on your car lights up.

What is the ABS on Volkswagen Polo 6?

To start with, it is vital to describe to you what the ABS of your Volkswagen Polo 6 is employed for so that you can understand the remaining of this article. The ABS (Anti-lock Braking System) is a system that prevents the wheels of your car from locking during braking. The objective of this system is to optimize the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Volkswagen Polo 6 is made up of different components, here they are:

  • Speed sensors on each wheel, which will examine if one of the wheels locks up.
  • A hydraulic system and valves that will control the pressure of the pads on the discs to control the braking power of the car
  • A computer that is the control center of your entire ABS system as well as the ABS light of your Volkswagen Polo 6

.
In reality, you can quite easily experience how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is precisely the actions that ABS enables, it will optimise braking to the maximum by associating the phases of pressure on the brake discs and the phases of release to prevent the wheels from locking up.

Meaning of an ABS light on Volkswagen Polo 6

Now we go forward to the section that you are most probably more interested in, meaning of an ABS warning light on a Volkswagen Polo 6? First of all, it is an orange light, so if it is on it shows that your ABS system is faulty. You should be conscious that when the ABS warning light is on, the ABS will be put into safety mode, so you should adapt your driving and not take any risks. Here are the different problems that the ABS warning light on your Volkswagen Polo 6 can show:

  • It could be a simple short circuit, a damaged wiring harness, a faulty relay or fuse. Use a pressure gauge to check it.
  • A malfunctioning ABS sensor: A failure of one of them motives the ABS light on your Volkswagen Polo 6 to turn on
  • The ABS hydraulic block of your Volkswagen Polo 6: If it is faulty it is possible that the indicator light will come on and you will no longer be able to use your ABS.
  • The ABS computer: If the computer has a problem, being the center of all decisions made to operate your ABS, the light will obviously turn on.

What if the ABS light turns on on my Volkswagen Polo 6?

We will now go forward to the section where we will try to give you some solutions to turn off this light, and thus answer the following question, what to do if the ABS light is on on my Volkswagen Polo 6?. The solutions will rely upon the deficiencies you are experiencing. First of all, pass your Volkswagen Polo 6 to the diagnostic tool, if you don’t know how to read a fault code on Volkswagen Polo 6, don’t hesitate to go through our article which points the steps to take. Once you have found the origin of your problem, here are the steps to take to correct it and turn off the ABS light on your Volkswagen Polo 6:

  • Trouble of the ECU or the hydraulic block: It can only be altered, and in this case, you will have to go through a specialist, but if it’s dead, it could cost you around 1000€ to change the ECU and 1500 to 2000€ if you have to change both of them.
  • Electrical problem: Once you’ve noticed an electrical problem with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, in any other case you’ll have to repair the wiring harness.
  • A faulty sensor: In some cases a simple cleaning of the sensors will be enough to resolve the problem, in any other case changing a sensor can cost up to a few hundred euros.

If you have any further questions about the Volkswagen Polo 6, do not hesitate to consult our Volkswagen Polo 6 category.