Keeping an eye on your automobile is vital in these days, in fact, if you do not do the minimum routine service of it, or if you do not take into account signs of abnormality, you strongly risk to observe your car getting in bad conditions. This is precisely the theme we are gonna focus on on this webpage, one of the indications that most disturbs drivers is the ABS warning light on Suzuki Alto. In an attempt to help you analyze this warning light, we will first check out what this ABS warning light corresponds to, then in a second what you can do if the ABS light is on Suzuki Alto?.

abs-light-stays-on-suzuki-alto

What does the ABS light on Suzuki Alto mean?

We will start our content page with the definition of an ABS warning light on Suzuki Alto, to do this, in first, we will find out what an ABS is, and next, why the ABS light on your car lights up.

What is the ABS on Suzuki Alto?

To start with, it is important to explain to you what the ABS of your Suzuki Alto is used for so that you can understand the remaining of this article. The ABS (Anti-lock Braking System) is a device that prevents the wheels of your car from locking during braking. The objective of this system is to optimise the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Suzuki Alto is made up of different parts, here they are:

  • Speed sensors on each wheel, which will analyze if one of the wheels locks up.
  • A hydraulic system and valves that will manage the pressure of the pads on the discs to manage the braking power of the car
  • A computer that is the control center of your entire ABS system as well as the ABS light of your Suzuki Alto

.
In fact, you can quite easily feel how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is exactly the behaviour that ABS enables, it will optimise braking to the maximum by relating the phases of pressure on the brake discs and the phases of discharge to prevent the wheels from locking up.

Meaning of an ABS light on Suzuki Alto

Now we proceed to the part that you are most certainly more keen on, meaning of an ABS warning light on a Suzuki Alto? Firstly, it is an orange light, so if it is on it shows that your ABS system is defective. You should be conscious that as soon as the ABS warning light is on, the ABS will be put into security mode, so you should adjust your driving and not take any risks. Here are the different problems that the ABS warning light on your Suzuki Alto can alert:

  • It could be a simple short circuit, a broken wiring harness, a defective relay or fuse. Use a pressure gauge to examine it.
  • A malfunctioning ABS sensor: A failure of one of them motives the ABS light on your Suzuki Alto to turn on
  • The ABS hydraulic block of your Suzuki Alto: If it is defective it is possible that the indicator light will occur and you will no longer be able to use your ABS.
  • The ABS computer: If the computer has a trouble, being the center of all decisions made to operate your ABS, the light will obviously turn on.

What if the ABS light activate on my Suzuki Alto?

We will now proceed to the part where we will try to give you some answers to switch off this light, and thus answer the following question, what to do if the ABS light is on on my Suzuki Alto?. The answers will be based upon the failures you are encountering. Firstly, pass your Suzuki Alto to the diagnostic tool, if you don’t know how to read a fault code on Suzuki Alto, don’t be reluctant to read our article which explains the steps to take. Once you have identified the cause of your problem, here are the steps to take to fix it and turn off the ABS light on your Suzuki Alto:

  • Trouble of the ECU or the hydraulic block: It can only be adjusted, and in this case, you will have to go through a specialist, but if it’s dead, it could cost you around 1000€ to change the ECU and 1500 to 2000€ if you have to change both of them.
  • Electrical problem: Once you’ve spotted an electrical problem with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, in any other case you’ll have to repair the wiring harness.
  • A defective sensor: In some cases a simple cleaning of the sensors will be enough to remedy the problem, in any other case changing a sensor can cost up to a few hundred euros.

If you wish more tutorials on the Suzuki Alto, go to our Suzuki Alto category.