Monitoring your car is fundamental in these modern times, in reality, if you do not do the minimum routine service of it, or if you do not take into account signs of abnormality, you highly risk to see your car getting in bad conditions. This is precisely the theme we are going to talk about today, one of the symptoms that most disturbs motorists is the ABS warning light on Skoda Enyaq. In an attempt to help you analyze this warning light, we will first check out what this ABS warning light corresponds to, then in a second how to proceed if the ABS light is on Skoda Enyaq?.
What does the ABS light on Skoda Enyaq signify?
We will begin our paper with the meaning of an ABS warning light on Skoda Enyaq, to do this, in first, we will find out what an ABS is, and later on, why the ABS light on your car lights up.
What is the ABS on Skoda Enyaq?
To start with, it is fundamental to describe to you what the ABS of your Skoda Enyaq is employed for so that you can understand the remaining of this content page. The ABS (Anti-lock Braking System) is a device that prevents the wheels of your car from locking during braking. The goal of this system is to lower the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Skoda Enyaq is made up of different parts, here they are:
- Speed sensors on each wheel, which will evaluate if one of the wheels locks up.
- A hydraulic system and valves that will control the pressure of the pads on the discs to control the braking power of the car
- A computer that is the control center of your entire ABS system as well as the ABS light of your Skoda Enyaq
.
In fact, you can quite easily feel how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is precisely the actions that ABS enables, it will optimise braking to the maximum by associating the phases of pressure on the brake discs and the phases of release to prevent the wheels from locking up.
Meaning of an ABS light on Skoda Enyaq
Now we go forward to the part that you are probably more curious about, meaning of an ABS warning light on a Skoda Enyaq? Firstly, it is an orange light, so if it is on it suggest that your ABS system is defective. You should be knowledgeable that whenever the ABS warning light is on, the ABS will be put into safety mode, so you should change your driving and not take any risks. Here are the different problems that the ABS warning light on your Skoda Enyaq can point:
- It could be a simple short circuit, a broken wiring harness, a defective relay or fuse. Use a pressure gauge to verify it.
- A malfunctioning ABS sensor: A breakdown of one of them causes the ABS light on your Skoda Enyaq to turn on
- The ABS hydraulic block of your Skoda Enyaq: If it is defective it is possible that the indicator light will come on and you will no longer be able to use your ABS.
- The ABS computer: If the computer has a trouble, being the center of all decisions made to manage your ABS, the light will unavoidably turn on.
What if the ABS light activate on my Skoda Enyaq?
We will now go forward to the part where we will try to give you some answers to turn off this light, and thus answer the following question, what to do if the ABS light is on on my Skoda Enyaq?. The answers will might depend on the failures you are enduring. Firstly, pass your Skoda Enyaq to the diagnostic tool, if you don’t know how to read a fault code on Skoda Enyaq, don’t think twice to examine our content page which points the steps to take. Once you have determined the origin of your issue, here are the steps to take to fix it and turn off the ABS light on your Skoda Enyaq:
- Trouble of the ECU or the hydraulic block: It can only be altered, and in this situation, you will have to go through a professional, but if it’s dead, it could cost you around 1000€ to replace the ECU and 1500 to 2000€ if you have to replace both of them.
- Electrical issue: Once you’ve detected an electrical issue with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, in any other case you’ll have to repair the wiring harness.
- A defective sensor: Often a simple cleaning of the sensors will be enough to resolve the issue, in any other case changing a sensor can cost up to a few hundred euros.
To discover more tips on the Skoda Enyaq, take a look at the Skoda Enyaq category.
