Monitoring your automobile is vital in these modern times, in truth, if you do not do the minimum maintenance of it, or if you do not take into account signals of abnormality, you highly risk to observe your car getting in bad conditions. This is exactly the topic we are going to talk about in this article, one of the symptoms that most perturbs car owners is the ABS warning light on Renault Kangoo 2. In an attempt to help you analyze this warning light, we will first look at what this ABS warning light corresponds to, then in a second what to do if the ABS light is on Renault Kangoo 2?.

abs-light-stays-on-renault-kangoo-2

What does the ABS light on Renault Kangoo 2 indicate?

We will commence our paper with the meaning of an ABS warning light on Renault Kangoo 2, for this, in first, we will find out what an ABS is, and soon after, why the ABS light on your car lights up.

What is the ABS on Renault Kangoo 2?

First of all, it is necessary to demonstrate to you what the ABS of your Renault Kangoo 2 is utilized for so that you can understand the rest of this content page. The ABS (Anti-lock Braking System) is a system that prevents the wheels of your car from locking during braking. The purpose of this system is to optimize the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Renault Kangoo 2 is made from several parts, here they are:

  • Speed sensors on each wheel, which will review if one of the wheels locks up.
  • A hydraulic system and valves that will control the pressure of the pads on the discs to control the braking power of the car
  • A computer that is the control center of your entire ABS system as well as the ABS light of your Renault Kangoo 2

.
The fact is, you can very easily feel how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is precisely the actions that ABS allows, it will optimise braking to the maximum by linking the phases of pressure on the brake discs and the phases of release to prevent the wheels from locking up.

Meaning of an ABS light on Renault Kangoo 2

Now we go forward to the section that you are likely more interested in, meaning of an ABS warning light on a Renault Kangoo 2? Firstly, it is an orange light, so if it is on it means that your ABS system is faulty. You should be knowledgeable that once the ABS warning light is on, the ABS will be put into security mode, so you should adjust your driving and not take any risks. Here are the different problems that the ABS warning light on your Renault Kangoo 2 can indicate:

  • It could be a simple short circuit, a damaged wiring harness, a faulty relay or fuse. Use a pressure gauge to verify it.
  • A malfunctioning ABS sensor: A breakdown of one of them causes the ABS light on your Renault Kangoo 2 to come on
  • The ABS hydraulic block of your Renault Kangoo 2: If it is faulty it is possible that the indicator light will occur and you will no longer be able to use your ABS.
  • The ABS computer: If the computer has a problem, being the center of all decisions made to manage your ABS, the light will inevitably come on.

What if the ABS light activate on my Renault Kangoo 2?

We will now go forward to the section where we will try to give you some solutions to switch off this light, and thus answer the following question, what to do if the ABS light is on on my Renault Kangoo 2?. The solutions will rely upon the deficiencies you are enduring. Firstly, pass your Renault Kangoo 2 to the diagnostic tool, if you don’t know how to read a fault code on Renault Kangoo 2, don’t think twice to go through our content page which points the steps to take. Once you have identified the source of your problem, here are the steps to take to resolve it and turn off the ABS light on your Renault Kangoo 2:

  • Trouble of the ECU or the hydraulic block: It can only be altered, and in this case, you will have to go through a professional, but if it’s dead, it could cost you around 1000€ to change the ECU and 1500 to 2000€ if you have to change both of them.
  • Electrical problem: Once you’ve noticed an electrical problem with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, in any other case you’ll have to repair the wiring harness.
  • A faulty sensor: In some cases a simple cleaning of the sensors will be enough to get rid of the problem, in any other case changing a sensor can cost up to a few hundred euros.

If perhaps you have any additional questions about the Renault Kangoo 2, do not hesitate to consult our Renault Kangoo 2 category.