Paying attention to your car is imperative in these modern times, in fact, if you do not do the minimum maintenance of it, or if you do not take into account signals of abnormality, you highly risk to see your car getting in bad conditions. This is exactly the topic we are gonna talk about in this article, one of the symptoms that most perturbs drivers is the ABS warning light on Peugeot e-2008. In an attempt to help you analyze this warning light, we will first take a look at what this ABS warning light corresponds to, then in a second what you can do if the ABS light is on Peugeot e-2008?.

abs-light-stays-on-peugeot-e-2008

What does the ABS light on Peugeot e-2008 indicate?

We will start our content page with the definition of an ABS warning light on Peugeot e-2008, for this, in first, we will find out what an ABS is, and soon after, why the ABS light on your car lights up.

What is the ABS on Peugeot e-2008?

To start with, it is essential to explain to you what the ABS of your Peugeot e-2008 is intended for so that you can understand the rest of this content page. The ABS (Anti-lock Braking System) is a system that prevents the wheels of your car from locking during braking. The purpose of this system is to lower the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Peugeot e-2008 is made from several elements, here they are:

  • Speed sensors on each wheel, which will review if one of the wheels locks up.
  • A hydraulic system and valves that will control the pressure of the pads on the discs to control the braking power of the car
  • A computer that is the control center of your entire ABS system as well as the ABS light of your Peugeot e-2008

.
The fact is, you can simply come to feel how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is exactly the behaviour that ABS allows, it will optimise braking to the maximum by relating the phases of pressure on the brake discs and the phases of release to prevent the wheels from locking up.

Meaning of an ABS light on Peugeot e-2008

Now we go forward to the part that you are probably more keen on, meaning of an ABS warning light on a Peugeot e-2008? To begin with, it is an orange light, so if it is on it suggest that your ABS system is defective. You should be advised that whenever the ABS warning light is on, the ABS will be put into security mode, so you should adapt your driving and not take any risks. Here are the different problems that the ABS warning light on your Peugeot e-2008 can indicate:

  • It could be a simple short circuit, a damaged wiring harness, a defective relay or fuse. Use a pressure gauge to check it.
  • A malfunctioning ABS sensor: A malfunction of one of them triggers the ABS light on your Peugeot e-2008 to turn on
  • The ABS hydraulic block of your Peugeot e-2008: If it is defective it is possible that the indicator light will come on and you will no longer be able to use your ABS.
  • The ABS computer: If the computer has a problem, being the center of all decisions made to run your ABS, the light will inevitably turn on.

What if the ABS light turns on on my Peugeot e-2008?

We will now go forward to the part where we will try to give you some answers to turn off this light, and thus answer the following question, what to do if the ABS light is on on my Peugeot e-2008?. The answers will be contingent on the failure you are going through. To begin with, pass your Peugeot e-2008 to the diagnostic tool, if you don’t know how to read a fault code on Peugeot e-2008, don’t think twice to read our content page which points out the steps to take. Once you have found the cause of your trouble, here are the steps to take to solve it and turn off the ABS light on your Peugeot e-2008:

  • Problem of the ECU or the hydraulic block: It can only be adjusted, and in this situation, you will have to go through a specialist, but if it’s dead, it could cost you around 1000€ to change the ECU and 1500 to 2000€ if you have to change both of them.
  • Electrical trouble: Once you’ve identified an electrical trouble with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, otherwise you’ll have to repair the wiring harness.
  • A defective sensor: Occasionally a simple cleaning of the sensors will be enough to get rid of the trouble, otherwise changing a sensor can cost up to a few hundred euros.

If you have any additional questions about the Peugeot e-2008, do not hesitate to consult our Peugeot e-2008 category.