Monitoring your car is fundamental in these modern times, indeed, if you do not do the minimum maintenance of it, or if you do not take into account signs of abnormality, you highly risk to see your car withering away. This is exactly the subject we are going to discuss today, one of the indicators that most perturbs drivers is the ABS warning light on Peugeot 306. In an attempt to help you analyze this warning light, we will first check out what this ABS warning light corresponds to, then in a second what to do if the ABS light is on Peugeot 306?.

abs-light-stays-on-peugeot-306

What does the ABS light on Peugeot 306 signify?

We will commence our article content with the meaning of an ABS warning light on Peugeot 306, for this, in first, we will discover what an ABS is, and later on, why the ABS light on your car lights up.

What is the ABS on Peugeot 306?

First of all, it is necessary to explain to you what the ABS of your Peugeot 306 is used for so that you can understand the remaining of this guideline. The ABS (Anti-lock Braking System) is a device that prevents the wheels of your car from locking during braking. The aim of this system is to optimize the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Peugeot 306 is made up of several parts, here they are:

  • Speed sensors on each wheel, which will evaluate if one of the wheels locks up.
  • A hydraulic system and valves that will control the pressure of the pads on the discs to control the braking power of the car
  • A computer that is the control center of your entire ABS system as well as the ABS light of your Peugeot 306

.
The truth is, you can with ease experience how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is precisely the behaviour that ABS enables, it will optimise braking to the maximum by linking the phases of pressure on the brake discs and the phases of release to prevent the wheels from locking up.

Meaning of an ABS light on Peugeot 306

Now we go forward to the section that you are almost certainly more keen on, meaning of an ABS warning light on a Peugeot 306? To begin with, it is an orange light, so if it is on it shows that your ABS system is faulty. You should be informed that as soon as the ABS warning light is on, the ABS will be put into security mode, so you should adjust your driving and not take any risks. Here are the different problems that the ABS warning light on your Peugeot 306 can indicate:

  • It could be a simple short circuit, a damaged wiring harness, a faulty relay or fuse. Use a pressure gauge to check it.
  • A malfunctioning ABS sensor: A malfunction of one of them motives the ABS light on your Peugeot 306 to come on
  • The ABS hydraulic block of your Peugeot 306: If it is faulty it is possible that the indicator light will occur and you will no longer be able to use your ABS.
  • The ABS computer: If the computer has a problem, being the center of all decisions made to run your ABS, the light will unavoidably come on.

What if the ABS light turns on on my Peugeot 306?

We will now go forward to the section where we will try to give you some solutions to shut off this light, and thus answer the following question, what to do if the ABS light is on on my Peugeot 306?. The solutions will be based upon the failure you are having. To begin with, pass your Peugeot 306 to the diagnostic tool, if you don’t know how to read a fault code on Peugeot 306, don’t think twice to examine our guideline which details the steps to take. Once you have established the origin of your trouble, here are the steps to take to correct it and turn off the ABS light on your Peugeot 306:

  • Issue of the ECU or the hydraulic block: It can only be altered, and in this case, you will have to go through a specialist, but if it’s dead, it could cost you around 1000€ to change the ECU and 1500 to 2000€ if you have to change both of them.
  • Electrical trouble: Once you’ve spotted an electrical trouble with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, in any other case you’ll have to repair the wiring harness.
  • A faulty sensor: In some cases a simple cleaning of the sensors will be enough to remedy the trouble, in any other case changing a sensor can cost up to a few hundred euros.

If you need more guides on the Peugeot 306, go to our Peugeot 306 category.