Paying attention to your vehicle is very important in these modern times, in fact, if you do not do the minimum routine service of it, or if you do not take into account alerts of abnormality, you strongly risk to observe your car getting in bad conditions. This is precisely the topic we are gonna focus on today, one of the symptoms that most disturbs drivers is the ABS warning light on Peugeot 208. In an attempt to help you analyze this warning light, we will first look at what this ABS warning light corresponds to, then in a second how to handle it if the ABS light is on Peugeot 208?.
What does the ABS light on Peugeot 208 mean?
We will commence our content page with the definition of an ABS warning light on Peugeot 208, to do this, in first, we will see what an ABS is, and later on, why the ABS light on your car lights up.
What is the ABS on Peugeot 208?
To begin with, it is necessary to explain to you what the ABS of your Peugeot 208 is utilized for so that you can understand the rest of this content page. The ABS (Anti-lock Braking System) is a device that prevents the wheels of your car from locking during braking. The objective of this system is to optimise the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Peugeot 208 is composed of different parts, here they are:
- Speed sensors on each wheel, which will evaluate if one of the wheels locks up.
- A hydraulic system and valves that will manage the pressure of the pads on the discs to manage the braking power of the car
- A computer that is the control center of your entire ABS system as well as the ABS light of your Peugeot 208
.
In fact, you can quite easily experience how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is exactly the actions that ABS allows, it will optimise braking to the maximum by relating the phases of pressure on the brake discs and the phases of discharge to prevent the wheels from locking up.
Meaning of an ABS light on Peugeot 208
Now we move on to the part that you are most likely more interested in, meaning of an ABS warning light on a Peugeot 208? First of all, it is an orange light, so if it is on it means that your ABS system is faulty. You should be aware that whenever the ABS warning light is on, the ABS will be put into safety mode, so you should change your driving and not take any risks. Here are the different problems that the ABS warning light on your Peugeot 208 can alert:
- It could be a simple short circuit, a damaged wiring harness, a faulty relay or fuse. Use a pressure gauge to examine it.
- A malfunctioning ABS sensor: A malfunction of one of them triggers the ABS light on your Peugeot 208 to turn on
- The ABS hydraulic block of your Peugeot 208: If it is faulty it is possible that the indicator light will turn on and you will no longer be able to use your ABS.
- The ABS computer: If the computer has a problem, being the center of all decisions made to run your ABS, the light will obviously turn on.
What if the ABS light comes on on my Peugeot 208?
We will now move on to the part where we will try to give you some answers to turn off this light, and thus answer the following question, what to do if the ABS light is on on my Peugeot 208?. The answers will could depend on the failures you are experiencing. First of all, pass your Peugeot 208 to the diagnostic tool, if you don’t know how to read a fault code on Peugeot 208, don’t think twice to read our content page which points out the steps to take. Once you have discovered the cause of your problem, here are the steps to take to solve it and turn off the ABS light on your Peugeot 208:
- Trouble of the ECU or the hydraulic block: It can only be adjusted, and in this case, you will have to go through a specialist, but if it’s dead, it could cost you around 1000€ to replace the ECU and 1500 to 2000€ if you have to replace both of them.
- Electrical problem: Once you’ve detected an electrical problem with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, otherwise you’ll have to repair the wiring harness.
- A faulty sensor: Often a simple cleaning of the sensors will be enough to remedy the problem, otherwise changing a sensor can cost up to a few hundred euros.
If perhaps you have any additional questions about the Peugeot 208, do not hesitate to consult our Peugeot 208 category.
