Keeping an eye on your vehicle is fundamental nowadays, in truth, if you do not do the minimum maintenance of it, or if you do not take into account signals of abnormality, you strongly risk to observe your car getting in bad conditions. This is specifically the theme we are going to focus on on this webpage, one of the indications that most disturbs car owners is the ABS warning light on Peugeot 206 . In an attempt to help you analyze this warning light, we will first take a look at what this ABS warning light corresponds to, then in a second what to do if the ABS light is on Peugeot 206 ?.

abs-light-stays-on-peugeot-206-

What does the ABS light on Peugeot 206 signify?

We will commence our paper with the definition of an ABS warning light on Peugeot 206 , for this, in first, we will find out what an ABS is, and afterwards, why the ABS light on your car lights up.

What is the ABS on Peugeot 206 ?

To begin with, it is essential to describe to you what the ABS of your Peugeot 206 is utilized for so that you can understand the remaining of this article content. The ABS (Anti-lock Braking System) is a device that prevents the wheels of your car from locking during braking. The purpose of this system is to optimize the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Peugeot 206 is consisting of different components, here they are:

  • Speed sensors on each wheel, which will review if one of the wheels locks up.
  • A hydraulic system and valves that will control the pressure of the pads on the discs to control the braking power of the car
  • A computer that is the control center of your entire ABS system as well as the ABS light of your Peugeot 206

.
The fact is, you can quite easily come to feel how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is exactly the behaviour that ABS allows, it will optimise braking to the maximum by relating the phases of pressure on the brake discs and the phases of discharge to prevent the wheels from locking up.

Meaning of an ABS light on Peugeot 206

Now we proceed to the part that you are certainly more curious about, meaning of an ABS warning light on a Peugeot 206 ? Firstly, it is an orange light, so if it is on it shows that your ABS system is faulty. You should be aware that once the ABS warning light is on, the ABS will be put into security mode, so you should modify your driving and not take any risks. Here are the different problems that the ABS warning light on your Peugeot 206 can indicate:

  • It could be a simple short circuit, a damaged wiring harness, a faulty relay or fuse. Use a pressure gauge to examine it.
  • A malfunctioning ABS sensor: A failure of one of them causes the ABS light on your Peugeot 206 to turn on
  • The ABS hydraulic block of your Peugeot 206 : If it is faulty it is possible that the indicator light will turn on and you will no longer be able to use your ABS.
  • The ABS computer: If the computer has a trouble, being the center of all decisions made to run your ABS, the light will unavoidably turn on.

What if the ABS light turns on on my Peugeot 206 ?

We will now proceed to the part where we will try to give you some solutions to shut off this light, and thus answer the following question, what to do if the ABS light is on on my Peugeot 206 ?. The solutions will be contingent on the failure you are having. Firstly, pass your Peugeot 206 to the diagnostic tool, if you don’t know how to read a fault code on Peugeot 206 , don’t be reluctant to examine our article content which points out the steps to take. Once you have determined the source of your trouble, here are the steps to take to resolve it and turn off the ABS light on your Peugeot 206 :

  • Issue of the ECU or the hydraulic block: It can only be altered, and in this situation, you will have to go through a specialist, but if it’s dead, it could cost you around 1000€ to replace the ECU and 1500 to 2000€ if you have to replace both of them.
  • Electrical trouble: Once you’ve noticed an electrical trouble with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, otherwise you’ll have to repair the wiring harness.
  • A faulty sensor: In some cases a simple cleaning of the sensors will be enough to get rid of the trouble, otherwise changing a sensor can cost up to a few hundred euros.

To discover more tips on the Peugeot 206 , take a look at the Peugeot 206 category.