Monitoring your automobile is important nowadays, in fact, if you do not do the minimum routine service of it, or if you do not take into account signs of abnormality, you highly risk to observe your car withering away. This is specifically the subject we are gonna talk about in this article, one of the signs that most disturbs motorists is the ABS warning light on Peugeot 1007. In an attempt to help you review this warning light, we will first look at what this ABS warning light corresponds to, then in a second what to do if the ABS light is on Peugeot 1007?.

abs-light-stays-on-peugeot-1007

What does the ABS light on Peugeot 1007 indicate?

We will start our article with the meaning of an ABS warning light on Peugeot 1007, for this, in first, we will find out what an ABS is, and next, why the ABS light on your car lights up.

What is the ABS on Peugeot 1007?

To start with, it is important to demonstrate to you what the ABS of your Peugeot 1007 is used for so that you can understand the remaining of this content page. The ABS (Anti-lock Braking System) is a system that prevents the wheels of your car from locking during braking. The aim of this system is to optimise the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Peugeot 1007 is made up of several elements, here they are:

  • Speed sensors on each wheel, which will evaluate if one of the wheels locks up.
  • A hydraulic system and valves that will manage the pressure of the pads on the discs to manage the braking power of the car
  • A computer that is the control center of your entire ABS system as well as the ABS light of your Peugeot 1007

.
In reality, you can quite easily come to feel how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is exactly the actions that ABS permits, it will optimise braking to the maximum by relating the phases of pressure on the brake discs and the phases of discharge to prevent the wheels from locking up.

Meaning of an ABS light on Peugeot 1007

Now we proceed to the section that you are certainly more interested in, meaning of an ABS warning light on a Peugeot 1007? To begin with, it is an orange light, so if it is on it shows that your ABS system is faulty. You should be conscious that as soon as the ABS warning light is on, the ABS will be put into security mode, so you should modify your driving and not take any risks. Here are the different problems that the ABS warning light on your Peugeot 1007 can point:

  • It could be a simple short circuit, a damaged wiring harness, a faulty relay or fuse. Use a pressure gauge to check it.
  • A malfunctioning ABS sensor: A breakdown of one of them motives the ABS light on your Peugeot 1007 to turn on
  • The ABS hydraulic block of your Peugeot 1007: If it is faulty it is possible that the indicator light will occur and you will no longer be able to use your ABS.
  • The ABS computer: If the computer has a problem, being the center of all decisions made to run your ABS, the light will undoubtedly turn on.

What if the ABS light comes on on my Peugeot 1007?

We will now proceed to the section where we will try to give you some answers to turn off this light, and thus answer the following question, what to do if the ABS light is on on my Peugeot 1007?. The answers will be based upon the failures you are going through. To begin with, pass your Peugeot 1007 to the diagnostic tool, if you don’t know how to read a fault code on Peugeot 1007, don’t be reluctant to browse our content page which explains the steps to take. Once you have found the cause of your trouble, here are the steps to take to solve it and turn off the ABS light on your Peugeot 1007:

  • Trouble of the ECU or the hydraulic block: It can only be adjusted, and in this situation, you will have to go through a specialist, but if it’s dead, it could cost you around 1000€ to replace the ECU and 1500 to 2000€ if you have to replace both of them.
  • Electrical trouble: Once you’ve detected an electrical trouble with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, otherwise you’ll have to repair the wiring harness.
  • A faulty sensor: In some cases a simple cleaning of the sensors will be enough to fix the trouble, otherwise changing a sensor can cost up to a few hundred euros.

To find more tips on the Peugeot 1007, take a look at the Peugeot 1007 category.