Paying attention to your automobile is fundamental in these modern times, indeed, if you do not do the minimum maintenance of it, or if you do not take into account signals of abnormality, you strongly risk to see your car getting in bad conditions. This is precisely the subject we are going to discuss on this webpage, one of the symptoms that most perturbs motorists is the ABS warning light on Nissan Murano. In an attempt to help you analyze this warning light, we will first take a look at what this ABS warning light corresponds to, then in a second how to handle it if the ABS light is on Nissan Murano?.

abs-light-stays-on-nissan-murano

What does the ABS light on Nissan Murano signify?

We will begin our paper with the definition of an ABS warning light on Nissan Murano, for this, in first, we will see what an ABS is, and soon after, why the ABS light on your car lights up.

What is the ABS on Nissan Murano?

To begin with, it is necessary to demonstrate to you what the ABS of your Nissan Murano is employed for so that you can understand the remaining of this article content. The ABS (Anti-lock Braking System) is a system that prevents the wheels of your car from locking during braking. The goal of this system is to optimize the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Nissan Murano is composed of different elements, here they are:

  • Speed sensors on each wheel, which will evaluate if one of the wheels locks up.
  • A hydraulic system and valves that will control the pressure of the pads on the discs to control the braking power of the car
  • A computer that is the control center of your entire ABS system as well as the ABS light of your Nissan Murano

.
The truth is, you can with ease come to feel how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is precisely the behaviour that ABS allows, it will optimise braking to the maximum by relating the phases of pressure on the brake discs and the phases of discharge to prevent the wheels from locking up.

Meaning of an ABS light on Nissan Murano

Now we move on to the part that you are most likely more curious about, meaning of an ABS warning light on a Nissan Murano? Firstly, it is an orange light, so if it is on it denotes that your ABS system is defective. You should be conscious that whenever the ABS warning light is on, the ABS will be put into safety mode, so you should change your driving and not take any risks. Here are the different problems that the ABS warning light on your Nissan Murano can point:

  • It could be a simple short circuit, a broken wiring harness, a defective relay or fuse. Use a pressure gauge to verify it.
  • A malfunctioning ABS sensor: A failure of one of them motives the ABS light on your Nissan Murano to turn on
  • The ABS hydraulic block of your Nissan Murano: If it is defective it is possible that the indicator light will come on and you will no longer be able to use your ABS.
  • The ABS computer: If the computer has a problem, being the center of all decisions made to run your ABS, the light will unavoidably turn on.

What if the ABS light activate on my Nissan Murano?

We will now move on to the part where we will try to give you some solutions to switch off this light, and thus answer the following question, what to do if the ABS light is on on my Nissan Murano?. The solutions will rely upon the deficiencies you are encountering. Firstly, pass your Nissan Murano to the diagnostic tool, if you don’t know how to read a fault code on Nissan Murano, don’t hesitate to examine our article content which details the steps to take. Once you have found the cause of your problem, here are the steps to take to solve it and turn off the ABS light on your Nissan Murano:

  • Trouble of the ECU or the hydraulic block: It can only be altered, and in this case, you will have to go through a professional, but if it’s dead, it could cost you around 1000€ to change the ECU and 1500 to 2000€ if you have to change both of them.
  • Electrical problem: Once you’ve spotted an electrical problem with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, otherwise you’ll have to repair the wiring harness.
  • A defective sensor: Occasionally a simple cleaning of the sensors will be enough to solve the problem, otherwise changing a sensor can cost up to a few hundred euros.

If you need more guides on the Nissan Murano, go to our Nissan Murano category.