Watching your car is imperative in these modern times, in truth, if you do not do the minimum maintenance of it, or if you do not take into account alerts of abnormality, you highly risk to observe your car withering away. This is precisely the theme we are gonna discuss today, one of the symptoms that most disturbs car owners is the ABS warning light on Mitsubishi Outlander. In an attempt to help you analyze this warning light, we will first look at what this ABS warning light corresponds to, then in a second how to proceed if the ABS light is on Mitsubishi Outlander?.
What does the ABS light on Mitsubishi Outlander mean?
We will start our paper with the definition of an ABS warning light on Mitsubishi Outlander, to do this, in first, we will discover what an ABS is, and afterwards, why the ABS light on your car lights up.
What is the ABS on Mitsubishi Outlander?
First of all, it is vital to explain to you what the ABS of your Mitsubishi Outlander is employed for so that you can understand the remaining of this guideline. The ABS (Anti-lock Braking System) is a device that prevents the wheels of your car from locking during braking. The purpose of this system is to optimise the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Mitsubishi Outlander is consisting of several parts, here they are:
- Speed sensors on each wheel, which will analyze if one of the wheels locks up.
- A hydraulic system and valves that will control the pressure of the pads on the discs to control the braking power of the car
- A computer that is the control center of your entire ABS system as well as the ABS light of your Mitsubishi Outlander
.
The truth is, you can quite easily experience how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is precisely the actions that ABS enables, it will optimise braking to the maximum by linking the phases of pressure on the brake discs and the phases of discharge to prevent the wheels from locking up.
Meaning of an ABS light on Mitsubishi Outlander
Now we go forward to the section that you are most likely more enthusiastic about, meaning of an ABS warning light on a Mitsubishi Outlander? Firstly, it is an orange light, so if it is on it means that your ABS system is faulty. You should be knowledgeable that when the ABS warning light is on, the ABS will be put into safety mode, so you should adjust your driving and not take any risks. Here are the different problems that the ABS warning light on your Mitsubishi Outlander can alert:
- It could be a simple short circuit, a damaged wiring harness, a faulty relay or fuse. Use a pressure gauge to check it.
- A malfunctioning ABS sensor: A breakdown of one of them triggers the ABS light on your Mitsubishi Outlander to come on
- The ABS hydraulic block of your Mitsubishi Outlander: If it is faulty it is possible that the indicator light will occur and you will no longer be able to use your ABS.
- The ABS computer: If the computer has a trouble, being the center of all decisions made to run your ABS, the light will unavoidably come on.
What if the ABS light turns on on my Mitsubishi Outlander?
We will now go forward to the section where we will try to give you some answers to turn off this light, and thus answer the following question, what to do if the ABS light is on on my Mitsubishi Outlander?. The answers will be based upon the failures you are experiencing. Firstly, pass your Mitsubishi Outlander to the diagnostic tool, if you don’t know how to read a fault code on Mitsubishi Outlander, don’t hesitate to go through our guideline which explains the steps to take. Once you have found the origin of your issue, here are the steps to take to fix it and turn off the ABS light on your Mitsubishi Outlander:
- Trouble of the ECU or the hydraulic block: It can only be altered, and in this situation, you will have to go through a professional, but if it’s dead, it could cost you around 1000€ to replace the ECU and 1500 to 2000€ if you have to replace both of them.
- Electrical issue: Once you’ve noticed an electrical issue with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, otherwise you’ll have to repair the wiring harness.
- A faulty sensor: Often a simple cleaning of the sensors will be enough to remedy the issue, otherwise changing a sensor can cost up to a few hundred euros.
If you wish more tutorials on the Mitsubishi Outlander, go to our Mitsubishi Outlander category.