Paying attention to your vehicle is fundamental in these modern times, indeed, if you do not do the minimum service of it, or if you do not take into account signals of abnormality, you strongly risk to observe your car withering away. This is precisely the theme we are gonna discuss today, one of the symptoms that most perturbs car owners is the ABS warning light on Mitsubishi Lancer. In an attempt to help you analyze this warning light, we will first check out what this ABS warning light corresponds to, then in a second how to handle it if the ABS light is on Mitsubishi Lancer?.
What does the ABS light on Mitsubishi Lancer indicate?
We will start our content with the definition of an ABS warning light on Mitsubishi Lancer, to do this, in first, we will see what an ABS is, and next, why the ABS light on your car lights up.
What is the ABS on Mitsubishi Lancer?
To start with, it is fundamental to explain to you what the ABS of your Mitsubishi Lancer is used for so that you can understand the remaining of this content. The ABS (Anti-lock Braking System) is a device that prevents the wheels of your car from locking during braking. The goal of this system is to lower the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Mitsubishi Lancer is consisting of different parts, here they are:
- Speed sensors on each wheel, which will examine if one of the wheels locks up.
- A hydraulic system and valves that will manage the pressure of the pads on the discs to manage the braking power of the car
- A computer that is the control center of your entire ABS system as well as the ABS light of your Mitsubishi Lancer
The truth is, you can with ease experience how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is precisely the actions that ABS permits, it will optimise braking to the maximum by associating the phases of pressure on the brake discs and the phases of release to prevent the wheels from locking up.
Meaning of an ABS light on Mitsubishi Lancer
Now we move on to the part that you are probably more keen on, meaning of an ABS warning light on a Mitsubishi Lancer? Firstly, it is an orange light, so if it is on it shows that your ABS system is defective. You should be knowledgeable that whenever the ABS warning light is on, the ABS will be put into safety mode, so you should modify your driving and not take any risks. Here are the different problems that the ABS warning light on your Mitsubishi Lancer can alert:
- It could be a simple short circuit, a broken wiring harness, a defective relay or fuse. Use a pressure gauge to verify it.
- A malfunctioning ABS sensor: A failure of one of them causes the ABS light on your Mitsubishi Lancer to turn on
- The ABS hydraulic block of your Mitsubishi Lancer: If it is defective it is possible that the indicator light will turn on and you will no longer be able to use your ABS.
- The ABS computer: If the computer has a problem, being the center of all decisions made to manage your ABS, the light will inevitably turn on.
What if the ABS light turns on on my Mitsubishi Lancer?
We will now move on to the part where we will try to give you some answers to switch off this light, and thus answer the following question, what to do if the ABS light is on on my Mitsubishi Lancer?. The answers will depend on the failures you are enduring. Firstly, pass your Mitsubishi Lancer to the diagnostic tool, if you don’t know how to read a fault code on Mitsubishi Lancer, don’t think twice to examine our content which details the steps to take. Once you have found the source of your issue, here are the steps to take to resolve it and turn off the ABS light on your Mitsubishi Lancer:
- Problem of the ECU or the hydraulic block: It can only be adjusted, and in this situation, you will have to go through a specialist, but if it’s dead, it could cost you around 1000€ to replace the ECU and 1500 to 2000€ if you have to replace both of them.
- Electrical issue: Once you’ve detected an electrical issue with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, in any other case you’ll have to repair the wiring harness.
- A defective sensor: In some cases a simple cleaning of the sensors will be enough to resolve the issue, in any other case changing a sensor can cost up to a few hundred euros.
If perhaps you have any additional questions about the Mitsubishi Lancer, do not hesitate to consult our Mitsubishi Lancer category.