Paying attention to your car is imperative nowadays, in truth, if you do not do the minimum routine service of it, or if you do not take into account signals of abnormality, you strongly risk to see your car getting in bad conditions. This is exactly the subject we are gonna talk about today, one of the symptoms that most disturbs motorists is the ABS warning light on Mini Mini 3. In an attempt to help you review this warning light, we will first look at what this ABS warning light corresponds to, then in a second how to handle it if the ABS light is on Mini Mini 3?.

abs-light-stays-on-mini-mini-3

What does the ABS light on Mini Mini 3 indicate?

We will commence our content page with the meaning of an ABS warning light on Mini Mini 3, to do this, in first, we will see what an ABS is, and later on, why the ABS light on your car lights up.

What is the ABS on Mini Mini 3?

To start with, it is necessary to demonstrate to you what the ABS of your Mini Mini 3 is used for so that you can understand the remaining of this article. The ABS (Anti-lock Braking System) is a system that prevents the wheels of your car from locking during braking. The aim of this system is to optimize the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Mini Mini 3 is made up of different components, here they are:

  • Speed sensors on each wheel, which will analyze if one of the wheels locks up.
  • A hydraulic system and valves that will manage the pressure of the pads on the discs to manage the braking power of the car
  • A computer that is the control center of your entire ABS system as well as the ABS light of your Mini Mini 3

.
In fact, you can simply experience how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is exactly the behaviour that ABS allows, it will optimise braking to the maximum by relating the phases of pressure on the brake discs and the phases of release to prevent the wheels from locking up.

Meaning of an ABS light on Mini Mini 3

Now we move on to the part that you are likely more keen on, meaning of an ABS warning light on a Mini Mini 3? To begin with, it is an orange light, so if it is on it means that your ABS system is faulty. You should be advised that once the ABS warning light is on, the ABS will be put into security mode, so you should adjust your driving and not take any risks. Here are the different problems that the ABS warning light on your Mini Mini 3 can show:

  • It could be a simple short circuit, a damaged wiring harness, a faulty relay or fuse. Use a pressure gauge to check it.
  • A malfunctioning ABS sensor: A failure of one of them causes the ABS light on your Mini Mini 3 to turn on
  • The ABS hydraulic block of your Mini Mini 3: If it is faulty it is possible that the indicator light will come on and you will no longer be able to use your ABS.
  • The ABS computer: If the computer has a problem, being the center of all decisions made to operate your ABS, the light will undoubtedly turn on.

What if the ABS light comes on on my Mini Mini 3?

We will now move on to the part where we will try to give you some solutions to switch off this light, and thus answer the following question, what to do if the ABS light is on on my Mini Mini 3?. The solutions will might depend on the deficiencies you are enduring. To begin with, pass your Mini Mini 3 to the diagnostic tool, if you don’t know how to read a fault code on Mini Mini 3, don’t hesitate to read our article which explains the steps to take. Once you have uncovered the origin of your problem, here are the steps to take to correct it and turn off the ABS light on your Mini Mini 3:

  • Trouble of the ECU or the hydraulic block: It can only be altered, and in this case, you will have to go through a specialist, but if it’s dead, it could cost you around 1000€ to change the ECU and 1500 to 2000€ if you have to change both of them.
  • Electrical problem: Once you’ve detected an electrical problem with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, otherwise you’ll have to repair the wiring harness.
  • A faulty sensor: Often a simple cleaning of the sensors will be enough to remedy the problem, otherwise changing a sensor can cost up to a few hundred euros.

To discover more tips on the Mini Mini 3, take a look at the Mini Mini 3 category.