Paying attention to your automobile is imperative nowadays, in truth, if you do not do the minimum routine service of it, or if you do not take into account alerts of abnormality, you strongly risk to observe your car withering away. This is exactly the topic we are gonna talk about on this webpage, one of the indications that most perturbs motorists is the ABS warning light on Mercury Milan. In an attempt to help you analyze this warning light, we will first look at what this ABS warning light corresponds to, then in a second what you can do if the ABS light is on Mercury Milan?.
What does the ABS light on Mercury Milan signify?
We will start our article with the definition of an ABS warning light on Mercury Milan, to do this, in first, we will see what an ABS is, and afterwards, why the ABS light on your car lights up.
What is the ABS on Mercury Milan?
To begin with, it is necessary to describe to you what the ABS of your Mercury Milan is utilized for so that you can understand the rest of this content. The ABS (Anti-lock Braking System) is a device that prevents the wheels of your car from locking during braking. The purpose of this system is to optimize the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Mercury Milan is made from several parts, here they are:
- Speed sensors on each wheel, which will evaluate if one of the wheels locks up.
- A hydraulic system and valves that will control the pressure of the pads on the discs to control the braking power of the car
- A computer that is the control center of your entire ABS system as well as the ABS light of your Mercury Milan
In fact, you can simply come to feel how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is precisely the actions that ABS enables, it will optimise braking to the maximum by relating the phases of pressure on the brake discs and the phases of discharge to prevent the wheels from locking up.
Meaning of an ABS light on Mercury Milan
Now we go forward to the section that you are most probably more curious about, meaning of an ABS warning light on a Mercury Milan? To begin with, it is an orange light, so if it is on it denotes that your ABS system is defective. You should be informed that once the ABS warning light is on, the ABS will be put into safety mode, so you should adapt your driving and not take any risks. Here are the different problems that the ABS warning light on your Mercury Milan can signal:
- It could be a simple short circuit, a damaged wiring harness, a defective relay or fuse. Use a pressure gauge to check it.
- A malfunctioning ABS sensor: A malfunction of one of them triggers the ABS light on your Mercury Milan to come on
- The ABS hydraulic block of your Mercury Milan: If it is defective it is possible that the indicator light will occur and you will no longer be able to use your ABS.
- The ABS computer: If the computer has a trouble, being the center of all decisions made to run your ABS, the light will obviously come on.
What if the ABS light turns on on my Mercury Milan?
We will now go forward to the section where we will try to give you some answers to shut off this light, and thus answer the following question, what to do if the ABS light is on on my Mercury Milan?. The answers will might depend on the failures you are going through. To begin with, pass your Mercury Milan to the diagnostic tool, if you don’t know how to read a fault code on Mercury Milan, don’t hesitate to read our content which explains the steps to take. Once you have determined the source of your problem, here are the steps to take to resolve it and turn off the ABS light on your Mercury Milan:
- Trouble of the ECU or the hydraulic block: It can only be altered, and in this situation, you will have to go through a specialist, but if it’s dead, it could cost you around 1000€ to replace the ECU and 1500 to 2000€ if you have to replace both of them.
- Electrical problem: Once you’ve spotted an electrical problem with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, in any other case you’ll have to repair the wiring harness.
- A defective sensor: Sometimes a simple cleaning of the sensors will be enough to fix the problem, in any other case changing a sensor can cost up to a few hundred euros.
If perhaps you have any additional questions about the Mercury Milan, do not hesitate to consult our Mercury Milan category.