Watching your automobile is imperative in these modern times, in fact, if you do not do the minimum maintenance of it, or if you do not take into account alerts of abnormality, you strongly risk to see your car withering away. This is precisely the subject we are going to focus on in this article, one of the indications that most disturbs motorists is the ABS warning light on Mazda CX 30. In an attempt to help you review this warning light, we will first check out what this ABS warning light corresponds to, then in a second how to proceed if the ABS light is on Mazda CX 30?.

abs-light-stays-on-mazada-cx-30

What does the ABS light on Mazda CX 30 signify?

We will start our article with the definition of an ABS warning light on Mazda CX 30, to do this, in first, we will discover what an ABS is, and later on, why the ABS light on your car lights up.

What is the ABS on Mazda CX 30?

First of all, it is fundamental to demonstrate to you what the ABS of your Mazda CX 30 is intended for so that you can understand the rest of this guideline. The ABS (Anti-lock Braking System) is a device that prevents the wheels of your car from locking during braking. The goal of this system is to optimize the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Mazda CX 30 is composed of several parts, here they are:

  • Speed sensors on each wheel, which will evaluate if one of the wheels locks up.
  • A hydraulic system and valves that will control the pressure of the pads on the discs to control the braking power of the car
  • A computer that is the control center of your entire ABS system as well as the ABS light of your Mazda CX 30

.
The fact is, you can very easily come to feel how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is exactly the actions that ABS enables, it will optimise braking to the maximum by associating the phases of pressure on the brake discs and the phases of discharge to prevent the wheels from locking up.

Meaning of an ABS light on Mazda CX 30

Now we move on to the part that you are almost certainly more keen on, meaning of an ABS warning light on a Mazda CX 30? To begin with, it is an orange light, so if it is on it denotes that your ABS system is defective. You should be aware that once the ABS warning light is on, the ABS will be put into safety mode, so you should modify your driving and not take any risks. Here are the different problems that the ABS warning light on your Mazda CX 30 can indicate:

  • It could be a simple short circuit, a damaged wiring harness, a defective relay or fuse. Use a pressure gauge to examine it.
  • A malfunctioning ABS sensor: A breakdown of one of them motives the ABS light on your Mazda CX 30 to turn on
  • The ABS hydraulic block of your Mazda CX 30: If it is defective it is possible that the indicator light will occur and you will no longer be able to use your ABS.
  • The ABS computer: If the computer has a problem, being the center of all decisions made to operate your ABS, the light will obviously turn on.

What if the ABS light activate on my Mazda CX 30?

We will now move on to the part where we will try to give you some solutions to shut off this light, and thus answer the following question, what to do if the ABS light is on on my Mazda CX 30?. The solutions will might depend on the failure you are having. To begin with, pass your Mazda CX 30 to the diagnostic tool, if you don’t know how to read a fault code on Mazda CX 30, don’t think twice to examine our guideline which points out the steps to take. Once you have determined the cause of your problem, here are the steps to take to resolve it and turn off the ABS light on your Mazda CX 30:

  • Issue of the ECU or the hydraulic block: It can only be adjusted, and in this case, you will have to go through a specialist, but if it’s dead, it could cost you around 1000€ to change the ECU and 1500 to 2000€ if you have to change both of them.
  • Electrical problem: Once you’ve spotted an electrical problem with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, otherwise you’ll have to repair the wiring harness.
  • A defective sensor: In some cases a simple cleaning of the sensors will be enough to resolve the problem, otherwise changing a sensor can cost up to a few hundred euros.

To find more tips on the Mazda CX 30, take a look at the Mazda CX 30 category.