Monitoring your automobile is fundamental in these days, in reality, if you do not do the minimum routine service of it, or if you do not take into account signs of abnormality, you highly risk to see your car getting in bad conditions. This is exactly the subject we are going to talk about on this webpage, one of the indications that most disturbs drivers is the ABS warning light on Lancia Ypsilon. In an attempt to help you analyze this warning light, we will first check out what this ABS warning light corresponds to, then in a second what to do if the ABS light is on Lancia Ypsilon?.

abs-light-stays-on-lancia-ypsilon

What does the ABS light on Lancia Ypsilon indicate?

We will start our content with the meaning of an ABS warning light on Lancia Ypsilon, for this, in first, we will find out what an ABS is, and afterwards, why the ABS light on your car lights up.

What is the ABS on Lancia Ypsilon?

To start with, it is essential to demonstrate to you what the ABS of your Lancia Ypsilon is utilized for so that you can understand the rest of this guideline. The ABS (Anti-lock Braking System) is a system that prevents the wheels of your car from locking during braking. The objective of this system is to optimize the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Lancia Ypsilon is made from several components, here they are:

  • Speed sensors on each wheel, which will analyze if one of the wheels locks up.
  • A hydraulic system and valves that will control the pressure of the pads on the discs to control the braking power of the car
  • A computer that is the control center of your entire ABS system as well as the ABS light of your Lancia Ypsilon

.
In reality, you can simply experience how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is precisely the behaviour that ABS permits, it will optimise braking to the maximum by relating the phases of pressure on the brake discs and the phases of release to prevent the wheels from locking up.

Meaning of an ABS light on Lancia Ypsilon

Now we go forward to the part that you are likely more keen on, meaning of an ABS warning light on a Lancia Ypsilon? To begin with, it is an orange light, so if it is on it denotes that your ABS system is defective. You should be aware that as soon as the ABS warning light is on, the ABS will be put into safety mode, so you should adjust your driving and not take any risks. Here are the different problems that the ABS warning light on your Lancia Ypsilon can indicate:

  • It could be a simple short circuit, a broken wiring harness, a defective relay or fuse. Use a pressure gauge to verify it.
  • A malfunctioning ABS sensor: A failure of one of them triggers the ABS light on your Lancia Ypsilon to come on
  • The ABS hydraulic block of your Lancia Ypsilon: If it is defective it is possible that the indicator light will come on and you will no longer be able to use your ABS.
  • The ABS computer: If the computer has a problem, being the center of all decisions made to operate your ABS, the light will unavoidably come on.

What if the ABS light turns on on my Lancia Ypsilon?

We will now go forward to the part where we will try to give you some solutions to turn off this light, and thus answer the following question, what to do if the ABS light is on on my Lancia Ypsilon?. The solutions will depend on the failure you are enduring. To begin with, pass your Lancia Ypsilon to the diagnostic tool, if you don’t know how to read a fault code on Lancia Ypsilon, don’t be reluctant to browse our guideline which details the steps to take. Once you have found the origin of your problem, here are the steps to take to fix it and turn off the ABS light on your Lancia Ypsilon:

  • Trouble of the ECU or the hydraulic block: It can only be adjusted, and in this case, you will have to go through a specialist, but if it’s dead, it could cost you around 1000€ to replace the ECU and 1500 to 2000€ if you have to replace both of them.
  • Electrical problem: Once you’ve spotted an electrical problem with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, in any other case you’ll have to repair the wiring harness.
  • A defective sensor: Sometimes a simple cleaning of the sensors will be enough to solve the problem, in any other case changing a sensor can cost up to a few hundred euros.

To find more tips on the Lancia Ypsilon, take a look at the Lancia Ypsilon category.