Paying attention to your automobile is vital in these days, in truth, if you do not do the minimum maintenance of it, or if you do not take into account signs of abnormality, you strongly risk to observe your car getting in bad conditions. This is precisely the theme we are gonna focus on in this article, one of the indicators that most perturbs motorists is the ABS warning light on hyundai getz. In an attempt to help you analyze this warning light, we will first look at what this ABS warning light corresponds to, then in a second what you can do if the ABS light is on hyundai getz?.

abs-light-stays-on-hyundai-getz

What does the ABS light on hyundai getz indicate?

We will begin our paper with the definition of an ABS warning light on hyundai getz, for this, in first, we will see what an ABS is, and next, why the ABS light on your car lights up.

What is the ABS on hyundai getz?

To start with, it is essential to explain to you what the ABS of your hyundai getz is utilized for so that you can understand the rest of this content. The ABS (Anti-lock Braking System) is a system that prevents the wheels of your car from locking during braking. The objective of this system is to lower the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your hyundai getz is consisting of several elements, here they are:

  • Speed sensors on each wheel, which will analyze if one of the wheels locks up.
  • A hydraulic system and valves that will manage the pressure of the pads on the discs to manage the braking power of the car
  • A computer that is the control center of your entire ABS system as well as the ABS light of your hyundai getz

.
The fact is, you can quite easily feel how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is precisely the behaviour that ABS enables, it will optimise braking to the maximum by associating the phases of pressure on the brake discs and the phases of discharge to prevent the wheels from locking up.

Meaning of an ABS light on hyundai getz

Now we proceed to the section that you are most likely more interested in, meaning of an ABS warning light on a hyundai getz? To begin with, it is an orange light, so if it is on it means that your ABS system is faulty. You should be aware that as soon as the ABS warning light is on, the ABS will be put into security mode, so you should modify your driving and not take any risks. Here are the different problems that the ABS warning light on your hyundai getz can alert:

  • It could be a simple short circuit, a broken wiring harness, a faulty relay or fuse. Use a pressure gauge to check it.
  • A malfunctioning ABS sensor: A malfunction of one of them triggers the ABS light on your hyundai getz to turn on
  • The ABS hydraulic block of your hyundai getz: If it is faulty it is possible that the indicator light will occur and you will no longer be able to use your ABS.
  • The ABS computer: If the computer has a trouble, being the center of all decisions made to operate your ABS, the light will inevitably turn on.

What if the ABS light turns on on my hyundai getz?

We will now proceed to the section where we will try to give you some answers to turn off this light, and thus answer the following question, what to do if the ABS light is on on my hyundai getz?. The answers will could depend on the deficiencies you are enduring. To begin with, pass your hyundai getz to the diagnostic tool, if you don’t know how to read a fault code on hyundai getz, don’t hesitate to browse our content which points the steps to take. Once you have discovered the cause of your trouble, here are the steps to take to resolve it and turn off the ABS light on your hyundai getz:

  • Issue of the ECU or the hydraulic block: It can only be adjusted, and in this case, you will have to go through a specialist, but if it’s dead, it could cost you around 1000€ to change the ECU and 1500 to 2000€ if you have to change both of them.
  • Electrical trouble: Once you’ve spotted an electrical trouble with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, in any other case you’ll have to repair the wiring harness.
  • A faulty sensor: Sometimes a simple cleaning of the sensors will be enough to remedy the trouble, in any other case changing a sensor can cost up to a few hundred euros.

If you wish more tutorials on the hyundai getz, go to our hyundai getz category.