Paying attention to your vehicle is very important in these modern times, in reality, if you do not do the minimum routine service of it, or if you do not take into account signals of abnormality, you strongly risk to observe your car getting in bad conditions. This is specifically the subject we are going to focus on on this webpage, one of the indications that most disturbs motorists is the ABS warning light on Ford S-max 2. In an attempt to help you analyze this warning light, we will first take a look at what this ABS warning light corresponds to, then in a second what to do if the ABS light is on Ford S-max 2?.

abs-light-stays-on-ford-s-max-2

What does the ABS light on Ford S-max 2 signify?

We will begin our content with the definition of an ABS warning light on Ford S-max 2, for this, in first, we will find out what an ABS is, and next, why the ABS light on your car lights up.

What is the ABS on Ford S-max 2?

To begin with, it is important to explain to you what the ABS of your Ford S-max 2 is used for so that you can understand the rest of this content. The ABS (Anti-lock Braking System) is a device that prevents the wheels of your car from locking during braking. The objective of this system is to optimize the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Ford S-max 2 is made up of different elements, here they are:

  • Speed sensors on each wheel, which will analyze if one of the wheels locks up.
  • A hydraulic system and valves that will control the pressure of the pads on the discs to control the braking power of the car
  • A computer that is the control center of your entire ABS system as well as the ABS light of your Ford S-max 2

.
In truth, you can quite easily come to feel how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is exactly the actions that ABS allows, it will optimise braking to the maximum by associating the phases of pressure on the brake discs and the phases of discharge to prevent the wheels from locking up.

Meaning of an ABS light on Ford S-max 2

Now we proceed to the part that you are certainly more interested in, meaning of an ABS warning light on a Ford S-max 2? First of all, it is an orange light, so if it is on it denotes that your ABS system is defective. You should be aware that when the ABS warning light is on, the ABS will be put into safety mode, so you should modify your driving and not take any risks. Here are the different problems that the ABS warning light on your Ford S-max 2 can alert:

  • It could be a simple short circuit, a broken wiring harness, a defective relay or fuse. Use a pressure gauge to examine it.
  • A malfunctioning ABS sensor: A breakdown of one of them motives the ABS light on your Ford S-max 2 to come on
  • The ABS hydraulic block of your Ford S-max 2: If it is defective it is possible that the indicator light will occur and you will no longer be able to use your ABS.
  • The ABS computer: If the computer has a problem, being the center of all decisions made to manage your ABS, the light will undoubtedly come on.

What if the ABS light activate on my Ford S-max 2?

We will now proceed to the part where we will try to give you some answers to shut off this light, and thus answer the following question, what to do if the ABS light is on on my Ford S-max 2?. The answers will could depend on the failures you are experiencing. First of all, pass your Ford S-max 2 to the diagnostic tool, if you don’t know how to read a fault code on Ford S-max 2, don’t be reluctant to read our content which explains the steps to take. Once you have uncovered the cause of your trouble, here are the steps to take to fix it and turn off the ABS light on your Ford S-max 2:

  • Problem of the ECU or the hydraulic block: It can only be altered, and in this situation, you will have to go through a professional, but if it’s dead, it could cost you around 1000€ to change the ECU and 1500 to 2000€ if you have to change both of them.
  • Electrical trouble: Once you’ve spotted an electrical trouble with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, in any other case you’ll have to repair the wiring harness.
  • A defective sensor: Occasionally a simple cleaning of the sensors will be enough to get rid of the trouble, in any other case changing a sensor can cost up to a few hundred euros.

If you need more tutorials on the Ford S-max 2, go to our Ford S-max 2 category.