Keeping an eye on your vehicle is fundamental nowadays, in truth, if you do not do the minimum service of it, or if you do not take into account symptoms of abnormality, you strongly risk to see your car getting in bad conditions. This is precisely the topic we are gonna talk about on this webpage, one of the symptoms that most disturbs motorists is the ABS warning light on Ford Crown Victoria. In an attempt to help you analyze this warning light, we will first take a look at what this ABS warning light corresponds to, then in a second how to handle it if the ABS light is on Ford Crown Victoria?.

abs-light-stays-on-ford-crown-victoria

What does the ABS light on Ford Crown Victoria signify?

We will commence our article content with the definition of an ABS warning light on Ford Crown Victoria, for this, in first, we will discover what an ABS is, and soon after, why the ABS light on your car lights up.

What is the ABS on Ford Crown Victoria?

To start with, it is important to demonstrate to you what the ABS of your Ford Crown Victoria is intended for so that you can understand the rest of this article. The ABS (Anti-lock Braking System) is a system that prevents the wheels of your car from locking during braking. The objective of this system is to lower the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Ford Crown Victoria is composed of different components, here they are:

  • Speed sensors on each wheel, which will review if one of the wheels locks up.
  • A hydraulic system and valves that will manage the pressure of the pads on the discs to manage the braking power of the car
  • A computer that is the control center of your entire ABS system as well as the ABS light of your Ford Crown Victoria

.
In truth, you can with ease feel how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is precisely the behaviour that ABS permits, it will optimise braking to the maximum by linking the phases of pressure on the brake discs and the phases of discharge to prevent the wheels from locking up.

Meaning of an ABS light on Ford Crown Victoria

Now we move on to the part that you are certainly more enthusiastic about, meaning of an ABS warning light on a Ford Crown Victoria? First of all, it is an orange light, so if it is on it shows that your ABS system is defective. You should be advised that when the ABS warning light is on, the ABS will be put into safety mode, so you should modify your driving and not take any risks. Here are the different problems that the ABS warning light on your Ford Crown Victoria can signal:

  • It could be a simple short circuit, a broken wiring harness, a defective relay or fuse. Use a pressure gauge to check it.
  • A malfunctioning ABS sensor: A breakdown of one of them motives the ABS light on your Ford Crown Victoria to turn on
  • The ABS hydraulic block of your Ford Crown Victoria: If it is defective it is possible that the indicator light will come on and you will no longer be able to use your ABS.
  • The ABS computer: If the computer has a trouble, being the center of all decisions made to run your ABS, the light will undoubtedly turn on.

What if the ABS light turns on on my Ford Crown Victoria?

We will now move on to the part where we will try to give you some solutions to switch off this light, and thus answer the following question, what to do if the ABS light is on on my Ford Crown Victoria?. The solutions will rely upon the deficiencies you are encountering. First of all, pass your Ford Crown Victoria to the diagnostic tool, if you don’t know how to read a fault code on Ford Crown Victoria, don’t hesitate to browse our article which points the steps to take. Once you have identified the cause of your problem, here are the steps to take to solve it and turn off the ABS light on your Ford Crown Victoria:

  • Trouble of the ECU or the hydraulic block: It can only be adjusted, and in this situation, you will have to go through a specialist, but if it’s dead, it could cost you around 1000€ to change the ECU and 1500 to 2000€ if you have to change both of them.
  • Electrical problem: Once you’ve noticed an electrical problem with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, otherwise you’ll have to repair the wiring harness.
  • A defective sensor: In some cases a simple cleaning of the sensors will be enough to get rid of the problem, otherwise changing a sensor can cost up to a few hundred euros.

To get more tips on the Ford Crown Victoria, take a look at the Ford Crown Victoria category.