Paying attention to your vehicle is very important in these modern times, in fact, if you do not do the minimum maintenance of it, or if you do not take into account signals of abnormality, you strongly risk to see your car withering away. This is precisely the topic we are gonna focus on today, one of the signs that most perturbs motorists is the ABS warning light on Fiat Panda. In an attempt to help you review this warning light, we will first check out what this ABS warning light corresponds to, then in a second how to handle it if the ABS light is on Fiat Panda?.

abs-light-stays-on-fiat-panda

What does the ABS light on Fiat Panda signify?

We will start our paper with the meaning of an ABS warning light on Fiat Panda, to do this, in first, we will discover what an ABS is, and later on, why the ABS light on your car lights up.

What is the ABS on Fiat Panda?

First of all, it is essential to demonstrate to you what the ABS of your Fiat Panda is used for so that you can understand the rest of this article content. The ABS (Anti-lock Braking System) is a system that prevents the wheels of your car from locking during braking. The objective of this system is to optimise the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Fiat Panda is made from different parts, here they are:

  • Speed sensors on each wheel, which will review if one of the wheels locks up.
  • A hydraulic system and valves that will control the pressure of the pads on the discs to control the braking power of the car
  • A computer that is the control center of your entire ABS system as well as the ABS light of your Fiat Panda

.
The truth is, you can very easily come to feel how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is precisely the behaviour that ABS allows, it will optimise braking to the maximum by linking the phases of pressure on the brake discs and the phases of discharge to prevent the wheels from locking up.

Meaning of an ABS light on Fiat Panda

Now we move on to the part that you are probably more enthusiastic about, meaning of an ABS warning light on a Fiat Panda? First of all, it is an orange light, so if it is on it suggest that your ABS system is defective. You should be aware that as soon as the ABS warning light is on, the ABS will be put into security mode, so you should adapt your driving and not take any risks. Here are the different problems that the ABS warning light on your Fiat Panda can point:

  • It could be a simple short circuit, a damaged wiring harness, a defective relay or fuse. Use a pressure gauge to check it.
  • A malfunctioning ABS sensor: A malfunction of one of them triggers the ABS light on your Fiat Panda to turn on
  • The ABS hydraulic block of your Fiat Panda: If it is defective it is possible that the indicator light will turn on and you will no longer be able to use your ABS.
  • The ABS computer: If the computer has a problem, being the center of all decisions made to manage your ABS, the light will inevitably turn on.

What if the ABS light activate on my Fiat Panda?

We will now move on to the part where we will try to give you some answers to shut off this light, and thus answer the following question, what to do if the ABS light is on on my Fiat Panda?. The answers will could depend on the failures you are encountering. First of all, pass your Fiat Panda to the diagnostic tool, if you don’t know how to read a fault code on Fiat Panda, don’t be reluctant to examine our article content which points the steps to take. Once you have discovered the cause of your problem, here are the steps to take to fix it and turn off the ABS light on your Fiat Panda:

  • Issue of the ECU or the hydraulic block: It can only be adjusted, and in this situation, you will have to go through a specialist, but if it’s dead, it could cost you around 1000€ to change the ECU and 1500 to 2000€ if you have to change both of them.
  • Electrical problem: Once you’ve spotted an electrical problem with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, in any other case you’ll have to repair the wiring harness.
  • A defective sensor: In some cases a simple cleaning of the sensors will be enough to resolve the problem, in any other case changing a sensor can cost up to a few hundred euros.

Whenever you have any further questions about the Fiat Panda, do not hesitate to consult our Fiat Panda category.