Paying attention to your automobile is important nowadays, in fact, if you do not do the minimum routine service of it, or if you do not take into account signs of abnormality, you highly risk to observe your car getting in bad conditions. This is exactly the theme we are going to talk about in this article, one of the signs that most perturbs car owners is the ABS warning light on Fiat Panda 3. In an attempt to help you review this warning light, we will first take a look at what this ABS warning light corresponds to, then in a second what you can do if the ABS light is on Fiat Panda 3?.
What does the ABS light on Fiat Panda 3 mean?
We will commence our paper with the meaning of an ABS warning light on Fiat Panda 3, to do this, in first, we will discover what an ABS is, and soon after, why the ABS light on your car lights up.
What is the ABS on Fiat Panda 3?
To start with, it is essential to demonstrate to you what the ABS of your Fiat Panda 3 is employed for so that you can understand the remaining of this content. The ABS (Anti-lock Braking System) is a system that prevents the wheels of your car from locking during braking. The goal of this system is to optimise the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Fiat Panda 3 is made up of several elements, here they are:
- Speed sensors on each wheel, which will review if one of the wheels locks up.
- A hydraulic system and valves that will control the pressure of the pads on the discs to control the braking power of the car
- A computer that is the control center of your entire ABS system as well as the ABS light of your Fiat Panda 3
.
The truth is, you can quite easily experience how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is exactly the actions that ABS enables, it will optimise braking to the maximum by relating the phases of pressure on the brake discs and the phases of discharge to prevent the wheels from locking up.
Meaning of an ABS light on Fiat Panda 3
Now we move on to the section that you are likely more enthusiastic about, meaning of an ABS warning light on a Fiat Panda 3? To begin with, it is an orange light, so if it is on it suggest that your ABS system is faulty. You should be knowledgeable that when the ABS warning light is on, the ABS will be put into security mode, so you should adjust your driving and not take any risks. Here are the different problems that the ABS warning light on your Fiat Panda 3 can point:
- It could be a simple short circuit, a damaged wiring harness, a faulty relay or fuse. Use a pressure gauge to check it.
- A malfunctioning ABS sensor: A failure of one of them causes the ABS light on your Fiat Panda 3 to come on
- The ABS hydraulic block of your Fiat Panda 3: If it is faulty it is possible that the indicator light will occur and you will no longer be able to use your ABS.
- The ABS computer: If the computer has a problem, being the center of all decisions made to run your ABS, the light will undoubtedly come on.
What if the ABS light activate on my Fiat Panda 3?
We will now move on to the section where we will try to give you some answers to shut off this light, and thus answer the following question, what to do if the ABS light is on on my Fiat Panda 3?. The answers will be contingent on the deficiencies you are going through. To begin with, pass your Fiat Panda 3 to the diagnostic tool, if you don’t know how to read a fault code on Fiat Panda 3, don’t hesitate to examine our content which details the steps to take. Once you have uncovered the origin of your issue, here are the steps to take to resolve it and turn off the ABS light on your Fiat Panda 3:
- Issue of the ECU or the hydraulic block: It can only be adjusted, and in this case, you will have to go through a specialist, but if it’s dead, it could cost you around 1000€ to change the ECU and 1500 to 2000€ if you have to change both of them.
- Electrical issue: Once you’ve noticed an electrical issue with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, in any other case you’ll have to repair the wiring harness.
- A faulty sensor: In some cases a simple cleaning of the sensors will be enough to get rid of the issue, in any other case changing a sensor can cost up to a few hundred euros.
If you wish more tutorials on the Fiat Panda 3, go to our Fiat Panda 3 category.
