Watching your automobile is very important in these modern times, indeed, if you do not do the minimum maintenance of it, or if you do not take into account signs of abnormality, you strongly risk to see your car getting in bad conditions. This is exactly the subject we are going to discuss on this webpage, one of the symptoms that most perturbs motorists is the ABS warning light on Fiat Bravo 2. In an attempt to help you analyze this warning light, we will first check out what this ABS warning light corresponds to, then in a second how to handle it if the ABS light is on Fiat Bravo 2?.

abs-light-stays-on-fiat-bravo-2

What does the ABS light on Fiat Bravo 2 signify?

We will commence our content page with the meaning of an ABS warning light on Fiat Bravo 2, for this, in first, we will see what an ABS is, and next, why the ABS light on your car lights up.

What is the ABS on Fiat Bravo 2?

To begin with, it is fundamental to describe to you what the ABS of your Fiat Bravo 2 is employed for so that you can understand the remaining of this article content. The ABS (Anti-lock Braking System) is a device that prevents the wheels of your car from locking during braking. The objective of this system is to lower the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Fiat Bravo 2 is made from several components, here they are:

  • Speed sensors on each wheel, which will examine if one of the wheels locks up.
  • A hydraulic system and valves that will control the pressure of the pads on the discs to control the braking power of the car
  • A computer that is the control center of your entire ABS system as well as the ABS light of your Fiat Bravo 2

.
In fact, you can with ease feel how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is precisely the behaviour that ABS enables, it will optimise braking to the maximum by relating the phases of pressure on the brake discs and the phases of release to prevent the wheels from locking up.

Meaning of an ABS light on Fiat Bravo 2

Now we move on to the part that you are probably more enthusiastic about, meaning of an ABS warning light on a Fiat Bravo 2? First of all, it is an orange light, so if it is on it denotes that your ABS system is defective. You should be aware that as soon as the ABS warning light is on, the ABS will be put into security mode, so you should modify your driving and not take any risks. Here are the different problems that the ABS warning light on your Fiat Bravo 2 can show:

  • It could be a simple short circuit, a damaged wiring harness, a defective relay or fuse. Use a pressure gauge to verify it.
  • A malfunctioning ABS sensor: A malfunction of one of them triggers the ABS light on your Fiat Bravo 2 to come on
  • The ABS hydraulic block of your Fiat Bravo 2: If it is defective it is possible that the indicator light will come on and you will no longer be able to use your ABS.
  • The ABS computer: If the computer has a trouble, being the center of all decisions made to run your ABS, the light will unavoidably come on.

What if the ABS light activate on my Fiat Bravo 2?

We will now move on to the part where we will try to give you some solutions to switch off this light, and thus answer the following question, what to do if the ABS light is on on my Fiat Bravo 2?. The solutions will could depend on the deficiencies you are going through. First of all, pass your Fiat Bravo 2 to the diagnostic tool, if you don’t know how to read a fault code on Fiat Bravo 2, don’t think twice to browse our article content which points out the steps to take. Once you have found the cause of your trouble, here are the steps to take to solve it and turn off the ABS light on your Fiat Bravo 2:

  • Trouble of the ECU or the hydraulic block: It can only be altered, and in this situation, you will have to go through a specialist, but if it’s dead, it could cost you around 1000€ to replace the ECU and 1500 to 2000€ if you have to replace both of them.
  • Electrical trouble: Once you’ve identified an electrical trouble with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, otherwise you’ll have to repair the wiring harness.
  • A defective sensor: In some cases a simple cleaning of the sensors will be enough to remedy the trouble, otherwise changing a sensor can cost up to a few hundred euros.

To get more tips on the Fiat Bravo 2, take a look at the Fiat Bravo 2 category.