Paying attention to your vehicle is fundamental in these modern times, in truth, if you do not do the minimum routine service of it, or if you do not take into account signs of abnormality, you strongly risk to see your car getting in bad conditions. This is exactly the subject we are going to talk about today, one of the indicators that most disturbs car owners is the ABS warning light on Chrysler Pacifica. In an attempt to help you review this warning light, we will first check out what this ABS warning light corresponds to, then in a second how to handle it if the ABS light is on Chrysler Pacifica?.

abs-light-stays-on-chrysler-pacifica

What does the ABS light on Chrysler Pacifica signify?

We will start our paper with the meaning of an ABS warning light on Chrysler Pacifica, for this, in first, we will find out what an ABS is, and afterwards, why the ABS light on your car lights up.

What is the ABS on Chrysler Pacifica?

To start with, it is necessary to explain to you what the ABS of your Chrysler Pacifica is employed for so that you can understand the rest of this article. The ABS (Anti-lock Braking System) is a device that prevents the wheels of your car from locking during braking. The purpose of this system is to optimise the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Chrysler Pacifica is made up of different parts, here they are:

  • Speed sensors on each wheel, which will examine if one of the wheels locks up.
  • A hydraulic system and valves that will manage the pressure of the pads on the discs to manage the braking power of the car
  • A computer that is the control center of your entire ABS system as well as the ABS light of your Chrysler Pacifica

.
The truth is, you can simply come to feel how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is precisely the behaviour that ABS allows, it will optimise braking to the maximum by relating the phases of pressure on the brake discs and the phases of discharge to prevent the wheels from locking up.

Meaning of an ABS light on Chrysler Pacifica

Now we go forward to the part that you are most probably more keen on, meaning of an ABS warning light on a Chrysler Pacifica? Firstly, it is an orange light, so if it is on it suggest that your ABS system is defective. You should be aware that as soon as the ABS warning light is on, the ABS will be put into safety mode, so you should change your driving and not take any risks. Here are the different problems that the ABS warning light on your Chrysler Pacifica can alert:

  • It could be a simple short circuit, a broken wiring harness, a defective relay or fuse. Use a pressure gauge to check it.
  • A malfunctioning ABS sensor: A breakdown of one of them triggers the ABS light on your Chrysler Pacifica to come on
  • The ABS hydraulic block of your Chrysler Pacifica: If it is defective it is possible that the indicator light will come on and you will no longer be able to use your ABS.
  • The ABS computer: If the computer has a problem, being the center of all decisions made to manage your ABS, the light will unavoidably come on.

What if the ABS light activate on my Chrysler Pacifica?

We will now go forward to the part where we will try to give you some solutions to switch off this light, and thus answer the following question, what to do if the ABS light is on on my Chrysler Pacifica?. The solutions will could depend on the deficiencies you are enduring. Firstly, pass your Chrysler Pacifica to the diagnostic tool, if you don’t know how to read a fault code on Chrysler Pacifica, don’t hesitate to browse our article which points the steps to take. Once you have located the source of your trouble, here are the steps to take to fix it and turn off the ABS light on your Chrysler Pacifica:

  • Issue of the ECU or the hydraulic block: It can only be adjusted, and in this situation, you will have to go through a professional, but if it’s dead, it could cost you around 1000€ to replace the ECU and 1500 to 2000€ if you have to replace both of them.
  • Electrical trouble: Once you’ve identified an electrical trouble with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, in any other case you’ll have to repair the wiring harness.
  • A defective sensor: Often a simple cleaning of the sensors will be enough to solve the trouble, in any other case changing a sensor can cost up to a few hundred euros.

If you need more guides on the Chrysler Pacifica, go to our Chrysler Pacifica category.